56
Recording Modes
Taking Pictures Using the Exposure Control Modes
, , , and
Program exposure mode
Recording mode:
The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
1
Set the mode dial to [ ]
2
Press the shutter button halfway
•If the aperture value and shutter speed flash red, you do not have the correct
exposure.
3
While the numeric values are displayed
(approximately 10 seconds), rotate the
thumb dial to change the values, i.e. to
use the Program Shift function
Program Shift indication
Aperture value
Shutter speed
8.0
5.6
4.0
250
125
60
30
15
60
p
•The operation can also be performed by rotating the control ring.
•To cancel Program Shift, either turn off the camera or rotate the thumb dial until
the Program Shift indication turns off.
•Program Shift can easily be canceled by setting a function button to [One Push
AE]. (→46, 63)
About Program Shift
The function for maintaining the same exposure (brightness) while changing the aperture
value and shutter speed combination is called “Program Shift”.
●
Program Shift cannot be used in the following cases:
•When recording using the flash
•When recording 4K photos
•When recording using [Post Focus]
•When ISO sensitivity is set to [
]
Summary of Contents for C-LUX
Page 1: ...LEICA C LUX INSTRUCTIONS ...
