Leica ASP300 S Instructions For Use Manual Download Page 69

Page: 69 / 94

Leica ASP300 S

5.3.2 Starting a program

Fig. 67

↓

→

Fig. 68

5. Operation

• Pressing

START

starts the program. Confirm the prompt that follows with

. The number of blocks to be edited (

NUMBER OF BLOCKS

) must be

entered if the RMS has been enabled.

• The

FINISH TIME

button displays the time when the currently running

program will end. If events occur that cause the end time to be delayed,

the end time display here will be updated accordingly.

• To modify a running program or open the retort to reload specimens (see

Chap. 5.3.3 "Opening the retort"

), the program has to be stopped – press

the

PAUSE

button. All buttons that have changeable functions are acti-

vated and can be edited.

To change or delete program steps, press

EDIT

and make the changes

in the input window.

CONTINUE

restarts the program.

The end time of a running program can be changed only if the

delay step has not yet been completed.

• You can switch from the graphical to the table display by touching the

TABLE

, and back again with

GRAPHICAL

Summary of Contents for ASP300 S































































































Search results

Summary of Contents for ASP300 S

Reviews:

Leica ASP300 S, Instructions For Use Manual, Page: 69 / 94

Search results

Summary of Contents for ASP300 S

Reviews: