manualshive.com logo in svg

Leica ASP300 S, Instructions For Use Manual, Page: 39 / 94

Share
Download
Leica ASP300 S Instructions For Use Manual Download Page 39

39

Leica ASP300 S

4.8  Touchscreen functions

The Leica ASP300 S is programmed and operated via a color 

LCD touchscreen.
The instrument's control software contains an online help. It 

contains a reference to the Instruction for Use.

The buttons change their appearance depending on whether they are 

 enabled or disabled. 

A button is disabled if the function that it performs is not applicable at the 

moment.

Disabled 

Enabled 

Disabled icons have a thinner border than active ones as shown here.

If a disabled button is pressed, a help text will be displayed, explaining why 

this particular button is disabled.

Button symbols

Pressing a button on the Leica ASP300 S activates the corresponding in-

strument function. All buttons have a uniform design for easy identification. 

The buttons may contain text labels or graphical icons.

Help can be accessed from any screen by 

pressing the 

HELP

 button.

Fig. 17

4.    Initial Operation

Summary of Contents for ASP300 S































































































Reviews:

No comments