45
Leica ASP300 S
SECURITY
Access rights to the instrument are managed here as
user profiles
.
SUPERVISOR MODE
:
Enabled
or
Disabled
Enabled
- There are two different user profiles.
A password is required for supervisor level access to the
instrument. Enabling
SUPERVISOR MODE
already requires
entering the password.
5.1.2 Access levels
The Leica ASP300 S may be configured to allow two levels of user access.
Operator access level:
• Operators may run programs and view results. On this level, the
OPERATOR
symbol is displayed in the upper right corner of the touchscreen; all enabled
buttons are surrounded by a black border.
Supervisor access level:
• Supervisors may perform all Operator functions, and additionally create
programs and perform the initial operation functions.
In supervisor mode, the
SMART SCREEN
menu displays a status bar with
information about the retort and the wax baths (see
Fig. 53
)
• To access Supervisor level,
press
SUPERVISOR
,enter the required pass-
word and confirm. After you enter the password, the
SUPERVISOR
sym-
bol appears in place of
OPERATOR
, the outlining of all active buttons
changes from black to blue, the
SUPERVISOR
button is replaced by the
OPERATOR
button.
"Operator" symbol
"Supervisor" symbol
→
Disabled
-
Default state of the instrument. All instrument and software
functions of the ASP300 S are fully accessible to all staff.
Fig. 29
5. Operation
Supervisor mode is disabled in factory condition.