Leica ASP300 S Operating Manual Download Page 28

Page: 28 / 76

Operating Manual V 1.0 – 07/2006

Setting up the instrument

4.8 Checklist for first operation

Once the instrument is ready to be switched on, the menus below have to be accessed to
set the required parameters.
For detailed instructions on each individual parameter, refer to the On-line help feature.

Parameter settings

Enter carbon filter age warning and pump
warning threshold.

Enter instrument name and select language.
Activate printer (optional).

Set all parameters as required, especially
wax bath set temperature.
Check whether date and time are correct.

Add the desired reagents and edit the warning
thresholds when

"REPLACE REAGENTS"

will be

displayed.

Allocate a reagent to each station.

Fill the reagent stations (bottles), either via re-
mote drain/ fill function (

SMART SCREEN

) or

manually (

REAGENT STATUS

Create the programs you need.
Both processing and retort cleaning programs
can be copied and modified.

Allocate the most popular programs to the

FAVORITES

menu and, if desired, set a finish

time for these programs and allocate a symbol.

Screen

→

Press button

→

Fig. 15

Summary of Contents for ASP300 S













































































Search results

Summary of Contents for ASP300 S

Reviews:

Brands by name

Popular brands

Leica ASP300 S, Operating Manual

Search results

Summary of Contents for ASP300 S

Reviews:

Brands by name

Popular brands