Leica Geosystems TM6100A, User Manual, Page: 55 / 126

Operation TM6100A 55
3.7 Limitation of the horizontal and vertical movements
General Due to the size of the panfocal telescope of the TM6100A a face change can only be
done through the lens side. This requires a turning restriction for the vertical move-
ment of the telescope.
In addition the motorized horizontal movements can be restricted because of access-
sories attached, i.e. Diode Laser DL2/3.
If a turning restriction is defined, the TM6100A will not pass or enter a certain vertical
or horizontal sector.
Vertical Limitations The default limits for vertical movements are applied as shown below.
Telescope side Range Value
Eyepiece V Begin 55 gon
V End 344 gon
Lens V Begin n/a
V End n/a
Use Limit Eyepiece