Leica Geosystems RX1200 User Manual Download

Page: 87 / 230

Operation

RX1200

Detach a clip-on-
housing step-by-
step

Turn GHT56 over to gain access to the space for the clip-on-housing.

Place the clip-on-housing into position such that
•

the guide rails on the GHT56 are aligned with the guide rails on the
clip-on-housing.

AND
•

the LEMO port on the GHT56 is aligned with the connector on the clip-
on-housing.

Slide the clip-on-housing into position such that the connector is
completely plugged into the LEMO port. It clicks.

)

Do not turn the screw on the topside of the clip-on-housing. The clip-on-
housing is automatically fixed when completely plugged into position.

Step

Description

Step

Description

Press the small press clip next to the guide rail on the GHT56 to unlock
the clip-on-housing from the GHT56.

Slide the clip-on-housing away from the press clip until the connector is
completely unplugged from the LEMO port.

Summary of Contents for RX1200







































































































































































































































Search results

Summary of Contents for RX1200

Reviews:

Related manuals for RX1200

Brands by name

Popular brands

Leica Geosystems RX1200, User Manual

Search results

Summary of Contents for RX1200

Reviews:

Related manuals for RX1200

Brands by name

Popular brands