Description of the menu
These values indicate the cart position in the grid.
Zoom to and center on grid.
Show/hide the layers and grid lines.
Indicates the connection status to the DSX utility detection system.
This icon should be green throughout the entire acquisition. Refer
to "Button DSX active" for details.
Indicates the connection status to the GNSS antenna. Refer to
"Button GNSS active" for details.
If a GNSS antenna is used, it should be green and not crossed-out
throughout the entire acquisition.
☞
Note, in the acquisition screen, the button only indicates
the status of GNSS connection. To set up the GNSS
antenna, go to the Home screen for the wizard and open
the project/draft to continue the scan.
To be supported in the upcoming versions.
Indicates the battery level of the DSX utility detection system. Fully
charge the battery before going out for a scan to avoid action ter-
mination due to insufficient DSX battery.
Use the arrow buttons to move the cart position and change the
orientation before a scan line starts.
Acquisition screen
28
DXplore Software
