OMEGA
Installation Manual
Edition February
2020
Omega
platform lift
page 14 of 52
It is important that there are not too many support elements on the support rope as
then it is not possible to tension the cable. A gap between the last support element
and the fixing bracket of the support rope is ideal. This gap depends on the length of
the rail and number of curves and is later reduced when the rope is tensioned! Below
a table that shows approximate gap length based on rail length.
Below it can be seen how the rope system should look before
putting the platform onto the rail.
Add the drive wheel cover and the mains filter again onto the drive wheel. This cover
must be fixed before the rope is tensioned!
Makes sure
elements are
pressed
together
Gap of X mm
before
tensioning the
cable
Fixing bracket of
support rope
Length
Gap
3-6m
80mm
8m
85mm
10m
90mm
12m
95mm
14m
100mm
16m
105mm
18m
110mm
20m
115mm
22m
120mm
24m
125mm
