BD
A CAP
TOS MIF
ARE / CAP
TOS iChar
ge MIF
ARE 22-09-22 (GB)
11
All information in mm
Figure: Plug the connecting cable into the lock
1. Insert the connector of the
connecting cable into the
socket in the lock.
2. For later assembly or disassembly purposes, stow the connec-
tion cable approx. 10-15cm in loops in the lock. Lead the cable
out of the lock (e.g. through the side wall) and assemble the
lock on the inside wall of the body.
Installation instructions for the ejector pin A2 on non-metal surfaces
An ejector pin can optionally be mounted on the inside of the sidewall of the locker. When the lock is unlocked, the
ejector pin pushes the locker door open by approx. 2 cm. The use of the ejector pin A2 in connection with spring-loa-
ded hinges must be checked on a project-specific basis.
32
34
(10)
19
13
Side wall
Tü
r
3
1
2
1. Fasten the housing of the ejector A2
with the provided screws.
2. Insert the ejector pin into the housing.
3. Press the cover onto the ejector pin.