16
Brake System Modification- Front
1. Remove front fenders and wheel covers.
2.
See Fig’s. 1 & 2.
Remove OEM line from anti-
dive valve and front master cylinder. Line con-
tinues to junction block located on steering
head. Disconnect lower hard line from block.
Remove block from frame and remove entire
line from motorcycle.
3.
See Fig. 3
. Install new brake line between anti-
dive valve and master cylinder using OEM
banjo bolts and the following hardware. Torque
banjo bolts to
18 ft-lbs
.
•
(1) Front brake line- S002066
•
(4) Copper Banjo Washers– GC6002
PREPARING THE MOTORCYCLE
Fig. 1
Fig. 2
Fig. 3
Anti-dive valve
Master cylinder
New line installed
Remove lower
line from block
Disconnect
block
