15
5.
See Fig. 6
. Install new reservoir assembly to
original bracket on motorcycle. New bracket
will mount to the inside of the existing bracket
with star washer between the two brackets.
•
(1) M6 x 1 Flange Head Screws– CB1905
•
(1) M6 Flange Lock Nut– CN1902
•
(1) Star Washer– CW2067
5.
See Fig. 6
. Install new rubber hose between
reservoir and master cylinder. Secure with
clamps on each end.
•
(5”) 5/16” Brake Hose– CH2016
•
(2) Clamps- CC2016
5.
See Fig. 7
.
ABS Models Only
- Finish mount-
ing ABS pump to the top frame using the origi-
nal hardware. Secure lines and wiring to
frame.
7. Use the specified brake fluid in the owner’s
manual and bleed the rear brake system.
Thoroughly bleed the system of any air using
the
upper
bleeders and lower bleeders on rear
brake caliper.
Fig. 6
Secure wiring to
upper frame
Fig. 7
OEM bracket
