manualshive.com logo in svg

LegWorks ATK HydraPro, Instructions For Use Manual, Page: 19 / 24

Share
Download
LegWorks ATK HydraPro Instructions For Use Manual Download Page 19

English

ATK HydraPro  |  

Instructions for Use

© Copyright LegWorks 2019

HYD-IFU-02

19

The cover protects the ATK HydraPro, as well the user’s clothes. The 

ATK HydraPro can be operated without the cover. Should the cover be bro-

ken, it can be easily ordered and replaced.

COVER

To remove cover, grasp and separate 

sides of cover from knee before pulling 
away from the anterior location of the 
joint (

Fig. 20

).

Cover should be removed when attaching 
the knee to a socket and/or adjusting the 
set screws for alignment.

Fig. 20

 ATK HydraPro Cover Removal

COVER O-RING

The cover has an o-ring to minimize noise. 
Ensure the o-ring is present. The bridge 
of the cover should be connected into the 
opening of the main body of the knee. 

AUTOLOCK RELEASE

Activation of the “AutoLock Release”

unlocks the knee which initiates flexion af

-

ter sitting with the knee in AutoLock mode 
(locked and extended). Simply push the 
‘AutoLock Release’ to either side to unlock 

and flex the knee.

Fig. 21

 ATK HydraPro AutoLock Release

Summary of Contents for ATK HydraPro

























Reviews:

No comments