manualshive.com logo in svg

LegWorks ATK HydraPro, Instructions For Use Manual, Page: 11 / 24

Share
Download
LegWorks ATK HydraPro Instructions For Use Manual Download Page 11

English

ATK HydraPro  |  

Instructions for Use

© Copyright LegWorks 2019

HYD-IFU-02

11

CONNECTIONS 

The proximal connection consists of a M10 bolt that is attached directly to a 
male pyramid adaptor (

Fig. 9

).

HYD-SF-02 ONLY - ADJUSTABLE STANCE FLEXION ADAPTER

The ATK HydraPro with Stance Flexion features a proximal articulating pyramid 

adapter with anterior and posterior bumpers that compress upon loading, 

providing up to 12 degrees of total movement throughout stance phase.

The HYD-SF-02 is shipped with the adapter pre-installed with the medium 
grade posterior bumper inserted.

BUMPER OPTIONS

SETUP AND OPERATION

Anterior or Posterior

Bumper Color

Hardness

Anterior

Blue

Medium (pre-installed)

Posterior

Black

Soft

Posterior

Blue

Medium (pre-installed)

Posterior

Gray

Firm

1. Top Adaptor Assembly
2. Anterior Bumper
3. Posterior Bumper
4. Plate
5. M10 Washer
6. For HYD-SF-02: 16mm Hex 

    Head M10 Adaptor Screw

Fig. 8

 Adjustable Stance Flexion Adaptor Assembly

Summary of Contents for ATK HydraPro

























Reviews:

No comments