LEGRAND Wattstopper LMSW-610-S, Installation Instructions Manual

Page: 6 / 8

6
PLUG N’ GO OPERATION (PNG)
Loads in fully wireless rooms will automatically bind to LMSW-6xx-S switches based on the behavior detailed for each switch below.
NOTE: Wired loads in hybrid rooms will have no automatic PnG binding and must be configured with LMCS-100. However, after
a switch is paired into the room, the configuration button can be pressed once to toggle loads in the room in order to verify
communication and operation.
LMSW-610-S
Ideal Application:
• Single-zone
• Single scene recall
• Toggle control
Input Wireless PnG Binding Default Press Default Hold
Button All Lighting Loads Toggle On/Off Toggle Ramp*
LMSW-611-S
Ideal Application:
• Single-zone, with dimming
• Toggle and up/down control
Input Wireless PnG Binding Default Press Default Hold
Button All Lighting Loads Toggle On/Off Toggle Ramp*
Rocker Up All Lighting Loads Send to 100% Raise
Rocker Down All Lighting Loads Send to Off Lower
LMSW-622-S
Ideal Application:
• Dual-zone, with dimming
• Toggle and up/down control for
both zones
Input Wireless PnG Binding Default Press Default Hold
Button 1 All Lighting Loads Toggle On/Off Toggle Ramp*
Rocker 1 Up All Lighting Loads Send to 100% Raise
Rocker1 Down All Lighting Loads Send to Off Lower
Button 2 All Lighting Loads Toggle On/Off Toggle Ramp
Rocker 2 Up All Lighting Loads Send to 100% Raise
Rocker 2 Down All Lighting Loads Send to Off Lower
* Toggle Ramp – Button press actions will toggle loads between minimum and maximum values. Press-and-hold actions will dim or ramp
loads. The first time you press and hold the button, the light level will raise gradually, stopping when you release the button (just like a
rocker). Each subsequent time you hold the button it will reverse the ramp direction from the previous hold.
LMSW-641-S
Ideal Application:
• Single or multiple zones
• -Toggle and up/down control
Input Wireless PnG Binding Default Press Default Hold
Button 1 All Lighting Loads Send to 100% Save Scene**
Button 2 All Lighting Loads Send to 75% Save Scene
Button 3 All Lighting Loads Send to 50% Save Scene
Button 4 All Lighting Loads Send to 25% Save Scene
Rocker Up All Lighting Loads Send to 100% Raise
Rocker Down All Lighting Loads Send to Off Lower
** Adjust lights to desired level using rockers. Then hold button for 5 seconds to
save the scene.