4
MOUNTING
(continued)
DIN Rail Mounting Dimensions
This diagram shows mounting dimensions of controller and option modules. Electronic and printed versions of this guide may not show
the dimensions to scale. Verify all measurements before drilling.
Tab Mounting Dimensions
Measurements shown below are in inches and (mm).
NOTE:
DIN rail mounting is recommended over tab mounting.
1. The LMJA-8125/8300 controller. With no option modules added, allow at least 1.5” (38mm) clearance around all sides.
2. Optional expansion module. Up to four (4) may be used.
3. Distances between center of tabs from one unit to another unit.
