20
CERTIFICATIONS
Federal Communications Commission (FCC)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation
Changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Agency Listings and Certifications
The LMJA-8125/8300 controller has the following agency listings, compliances, and certifications:
•
UL-916, Energy Management Equipment, - Edition 4
•
FCC Part 15, Class B - Federal Communications Commission, with FCC Part 15, Subpart C - WiFi
•
ICES-003, Class B - Industry Canada Interference - Causing Equipment Standard
•
RoHS 2 (Restriction of Hazardous Substances), Directive 2011/65/EU
•
CE Declaration of Conformity (Council Directive 004-108-EC)
Canadian Department of Communications (DOC)
This Device complies with Industry Canada License-exempt RSS Standard(s). Operation is subject to the following two conditions:
1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe A respecte toutes les exigencies du Reglement sur le material broilleur du Canada.
Approved Antenna Listing
•
ANT-DB1-RAF-RPS
Transmitter Module Listing
•
Contains Transmitter Module FCC ID: W98-12977
•
Contains Transmitter Module IC: 8339A-12977