LEGRAND Raritan SRC-0100, User Manual

Page: 650 / 698

638
In This Chapter
RJ45-to-DB9 Cable Requirements for Modem Connections ................. 637
Reserving IP Addresses in DHCP Servers .............................................. 638
Sensor Threshold Settings...................................................................... 642
Altitude Correction Factors..................................................................... 650
Ways to Probe Existing User Profiles ..................................................... 651
Raritan Training Website......................................................................... 651
Role of a DNS Server............................................................................... 651
Cascading Troubleshooting..................................................................... 652
Installing the USB-to-Serial Driver (Optional)........................................ 656
Initial Network Configuration via CLI...................................................... 657
Device-Specific Settings.......................................................................... 665
TLS Certificate Chain............................................................................... 665
Browsing through the Online Help ......................................................... 672
RJ45-to-DB9 Cable Requirements for Modem Connections
An RJ45-to-DB9 adapter/cable is required for connecting a modem to
the SRC device.
A third party RJ45-to-DB9 adapter/cable needs to meet the following
requirements.

RJ-45 to "DB9 male"

RX/TX and according control pins are NOT crossed

With the following pin assignments:
Pin signal DB9 pin No. RJ-45 pin No.
DCD 1 5
RxD 2 6
TxD 3 3
DTR 4 2
GND 5 4
DSR 6 7
RTS 7 1
CTS 8 8
RIR 9 N/A
Appendix I Additional SRC Information