LEGRAND Raritan MCD Series Manual Download

Page: 17 / 83

MasterConsole Digital-LED KVM Drawer

MasterConsole Digital-LED (MCD

‑

LED) series is a KVM drawer which is functionally similar to MCD KVM

switches. For information on MCD KVM switches, see

MasterConsole Digital KVM Switches

(on page

10).

Important: MCD‑LED KVM drawers do NOT support audio transmission even though

an audio-capable MDCIM or MDUTP cable is used.

MCD

‑

LED includes the following two models. Both models come with a 17" LED LCD display.

•

MCD

‑

LED17108

•
•

MCD

‑

LED17116

•

The adjustable bracket length of either model is up to 908 cm (35.75 inches).

In This Chapter

MCD-LED Product Overview

MCD

‑

LED is a KVM (keyboard/video/mouse) combination switch and KVM drawer that enables you to

control multiple servers from a single set of keyboard, touchpad, and monitor.

Connect multiple servers to a MCD

‑

LED KVM drawer, and you will be able to switch among servers

connected to the MCD

‑

LED.

You cannot establish a two-tier system with MCD

‑

LED KVM drawers, but you can use it as the base

switch of any two-tier MCD system. See

Two-Tier System

(on page 50).

The MCD-LED switch features the use of standard network patch cables (Category 5e/6 UTP) for

connecting servers.

One MCD-LED KVM system comprises the following:

•

MCD-LED switch

•
•

MCD Computer Interface Modules (MDCIMs) and/or MDUTP cables

•

Note: You CANNOT connect a MCD

‑

LED KVM drawer to Raritan's Dominion KX III or KX2-101-V2 because

it does not have a 'console' port.

Summary of Contents for Raritan MCD Series



















































































Search results

Summary of Contents for Raritan MCD Series

Reviews:

Related manuals for Raritan MCD Series

Brands by name

Popular brands

LEGRAND Raritan MCD Series, Manual

Search results

Summary of Contents for Raritan MCD Series

Reviews:

Related manuals for Raritan MCD Series

Brands by name

Popular brands