7
Configuration
The Omizzy™ server must be wired as shown in
the installation manual.
To configure the server, it is advisable to carry out
the operations below in the following order:
- Connect to Omizzy™
- Configure Omizzy™
(set the clock, configure IP and PPP, etc)
- Enter the e-mail addresses
- Register the devices
- Program the alarms
- Program the scenarios
Connecting to Omizzy™
To connect to Omizzy™, start your Internet browser
and type in the address allocated to Omizzy™:
http://192.168.1.12.
Then <Enter>
The connection with Omizzy™ is established.
Once connected to Omizzy™, access the installation
pages.
Configuring the password
Click on “Installation”.
The installation screens are password protected
(the default password is the last 6 characters of
the serial number - S/N - in lower case letters).
This password can be changed by clicking on
the “Change” button. The password gives access to
the installation pages for a period of 10 minutes.
At the end of this period, the password must be
entered again.
Once the password has been entered, the
“Configuration” page is accessible:
Setting the clock
There are two possible options: automatic setting
by synchronization with the PC, or manual setting
by direct entry.
