Page 16
UNDERSTANDING CABLE MANAGEMENT AND EQUIPMENT MOUNTING
MAINTAINING YOUR CART
1. Clean only using soft dry cloth.
2. Over time, lift mechanism may begin to squeak. Lubricate by applying lithium or Teflon® grease to
the lift arms on both sides of the unit.
FIGURE T
Service
Loop to
Display
NOTE
: Section not for
component storage.
Cable
Clip
Grooves
Plug
cable into
appropriately
rated
receptacle.
Cable
8-32
Pan
Head
Screw
Cable
Management
Clip
1. Raise display to highest position before securing cables. For more information, see “Understanding
Some Operational Items” on page 9.
2. Create a service loop to assure adequate cable length when display is fully extended. (
FIGURE T
)
3. Secure cables into mounting holes and grooves using cable clips 8-32 pan head screws, and wire
ties as shown.
4. Lower display to the lowest position to test adequate service loop cable length.
Summary of Contents for MIDDLE ATLANTIC FlexView 800 Series
Page 18: ......
