Installation Instructions
LSCU
9
Display Installation
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all accessories and components attached to the LSCU head
assembly up to (and including) the display does not exceed
175 lbs (79.3 kg).
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
MOUNT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! DO NOT substitute
hardware. Only use hardware provided or specified by
manufacturer.
1.
Select correct screws, nesting spacers (if necessary) and
universal washers (if required) from the hardware bag (A-H)
and install hardware to back of screen. (See Figure 8)
Figure 8
IMPORTANT ! :
The M8 screws do
NOT
require a
washer. Use the universal washer (H) only with M4, M5
and M6 screws.
NOTE:
The nesting spacers (G) may be used separately, or put
two together in different configurations to create
different size spacers. (See Figure 9)
Figure 9
WARNING:
Always use two people to mount display to
cart!
2.
Determine which holes will be used to mount display to cart.
(See Figure 10)
Figure 10
IMPORTANT ! :
Do NOT install large cover (S) to back
before installing display.
1
(G) x 4
(H) x 4
(A-F x 4)
(Single)
(Nested)
(Stacked)
0.375
[9.5]
0.563
[14.3]
0.750
[19.1]