LSCU
Installation Instructions
8
6.
Install four legs (P and Q) onto two coupler assemblies (U).
(See Figure 4)
NOTE:
Legs with brakes (P) may be installed to front or back
depending on user preference.
Figure 4
7.
Use two M8 x 16mm flat head cap screws (V) to secure
each leg (P and Q) to coupler assembly (U). (See Figure 5)
Figure 5
WARNING:
Always use two people to move the cart into an
upright position.
8.
Remove cart from box by tipping it from the top onto its
wheels. (See Figure 6)
9.
Lock wheels to hold cart in position during installation.
Figure 6
10. Adjust height to desired height if necessary following steps
in
ADJUSTMENTS - HEIGHT Section
.
IMPORTANT ! :
If height is not adjusted at this point, all
further steps will have to be undone in order to adjust
height later.
11. Insert two endcaps (J) into each side of main assembly (N).
(See Figure 7)
12. Use two M8 x 100mm socket head cap screws (W) to
secure each side handle (K) to main assembly (N). Do NOT
overtighten screws! (See Figure 7)
Figure 7
(Q) x 2
6
(P) x 2
(U) x 2
6
6
6
7
(V) x 8
(N)
(U) x 2
8
11
11
12
(W) x 2
(K)