4 / 14
EMS CX
3
- Signalling Auxiliary Contact
(CA + SD)
Cat. N°:
4 149 29
4. PREPARATION
–
CONNECTION
(continued)
Data connection (EMS CX
3
modules inter-connection)
(continued)
:
. Via a mix between specific communication patch cords and
communication rails in order to create a link between several rows
Two situations:
-
Individually connected with communication rails.
The communication patch cord allows to connect two rows.
-
Individually connected with communication patch cords &
communication rail.
The communication patch cords allow to connect EMS CX
3
module on a row and to connect two rows.
5. GENERAL CHARACTERISTICS
Front face marking:
. By permanent ink pad printing (red line) and laser marking
Lateral side marking:
. By laser.
left side: Standard and programming information
right side: installing and traceability information
Technical data sheet: F02334EN/02
Updated: 07/11/2018
Created: 20/07/2016
Function name:
CA = auxiliary contact
SD = fault signalling
Legrand address
Indicates the presence
of the addressing
track-wheel
Assembling
information
Traceability
information
Data connection
with communication
rail
Data connection
with communication
patch cords
Standards
Label: to be removed
and kept if necessary
(ID and module
info…
