15
For the initial commissioning or following a software update or restoration of the default settings (code 9090) the
controller is started up with the standard operating settings which have the following values:
• Controller address: 1
• Chaperone period: 15 seconds
• Door contact operation: Normally Closed (value 0)
• Door contact time delay: 5 seconds
• Chaperone code: 217
• Acknowledgement code: 369
• Buzzer volume: 2
• Mode selection (surveillance/intruder) via wire input (value 0)
• Locking control: Lock (value 0)
• Direction detection: Deactivated
• Surveillance of the radio elements: Activated (value 0)
• User language: French
• System link protocol: 2G anti-wandering system
• No code filtering (surveillance for all wristbands)
Commissioning
FaCtorY settIngs
