background image

10

Certifications

CE marking

The CE marking on this product confirms its compliance with European 

regulations (EU) no. 305/2011 relating to construction products applicable 

to it, especially its compliance with the harmonised specifications of 

standard NF EN 14604: 2005 + AC: 2008

NF mark

The NF mark applied to the self-contained smoke detector/alarm ensures 

safety and constant quality that is checked by specialists. Through its 

guaranteed exhaustive checks (contractor’s quality management system, 

production controls, audits and surveillance tests, etc) the customer has 

the reassurance brought by certified products. 

The NF-DAAF mark confirms the product’s compliance with the NF292 

certification guideline; it is awarded and overseen by AFNOR Certification, 

11 rue Francis de Pressenté - 93571 LA PLAINE ST DENIS Cedex.

Essential certified characteristics covered by the NF mark

Type of mounting

Wall only

NO

Ceiling only

NO

Wall or ceiling

Yes

Main power supply source

Built into the device

Battery life

10 years

Interconnectable device

NO

Designed for installation in a camper van

Yes

Connection to external auxiliary devices

NO

Radio link (to alarm control panel)

NO

Individual alarm indicator

Yes

Alarm override switch

Yes

Accessibility option

NO

Summary of Contents for 0 405 17













Reviews: