Leetro MPC6575, Manufacturer'S Manual

Page: 39 / 53

POP Text Display
27
Press to return to the main interface.
The other buttons are invalid.
Precision of this parameter is 0.1mm. The set parameter can be saved automatically if power’s
off.
7.1.6 Laser Set Interface
When cursor is nonactivated, press to shift the interface from main interface to the Laser
Set interface.
Then press to activate the cursor and set the laser time and power by the number
buttons, and press to save the edited settings. The default laser time and power is
0millisecond and 100% respectively. The laser time can be edited within the range of
0-99999milliseconds, and the percentage of laser power can be edited within the range of 0-100%.
If the laser time is 0ms, user can hold down button to generate laser beam and loose the
button to stop the laser. If the laser time is set to be 200ms, for example, each time the user press
the button the laser beam will be generated for 20ms.
Press to return to the main interface.
The other buttons are invalid.
7.1.7 Work Interface
When cursor is nonactivated, press to shift the interface from the main interface to the
work interface. Following options will be displayed in the work interface:
1) File: Name of current file.
2) Speed: Current processing speed. The two buttons can be used for editing the
working speed. Press to increase the speed, and press to reduce the speed.
Percentage of speed is within the range of 0-100
％
.
3) Power: Current processing power such as the low-speed laser power and the high-speed
laser power. The two buttons can be used for editing the high-speed laser power.
Press to reduce the high-speed laser power, and press to increase the
high-speed laser power. Percentage of power is within the range of 0-100
％
. The low-speed
laser power value can not be edited in work interface. To edit the low-speed laser power,
press to return to the main interface first and do as instructed in Chapter 7.1.4 .
4) Time: Process time.
5) Status: Indicate the current work status.
In work interface, button functions of the panel are stated as follows: