Leetro MPC6575, Manufacturer'S Manual

Page: 38 / 53

MPC6575-Close-loop Laser Engraving &Cutting Controller (Rev. 1.0)
26
2) : Press this button to activate the cursor.
3) : The four buttons are used for controlling the movment of the laser.
They correspond to Upwards, Downwards, Leftwards and Rightwards respectively.
4) : Press this button to shift to the jog set interface.
5) : Press this button to shift to the laser set interface
.
6) : Press this button to delete the current file.
7) : Press this button to move the Z axis towards positive direction.
8) : Press this button to move the Z axis towards negative direction.
9) : Page Down.
10) : Press this datum button to move the laser return to origin point.
11) : Press the cut button to cut the border at 100% laser power.
12)
: Page Up.
13) The other buttons are invalid.
Button Functions of the Panel (Cursor is activated):
1) : Press this button when cursor is activated, the cursor will move to the next option.
There are four options such as speed, low-speed power, high-speed power and pieces.
User can edit the option which is highlighted with the cursor by pressing the number buttons
in the panel, and press to save the edited values. To make the cursor disappear
(nonactivated), press this tab button when the cursor moves to the option of pieces.
2) : To confirm the edited settings.
3) : Press Esc button to clear the selected value.
4) The other buttons are invalid.
All set parameters can be saved automatically if power’s off.
7.1.5 Jog Set Interface
When cursor is nonactivated, press to shift the interface from main interface to the Jog Set
interface.
Then press to edit the jog distance parameter, and press to save the edited
setting. If jog distance is set as default value 0mm, user can hold down one of the direction
buttons to move the laser and loose the direction button to stop the movement.
If the jog distance is set to be 100mm, for example, each time the user press the direction button the
laser will move a distance of 100mm.