Jan 2012
T190 Iss.2
Page 33 of 38
10.3.
RS 232 serial communication (232)
RS 232 communication is fitted as standard. This allows for the SD card data to be remotely accessed and
downloaded.
A PC with a serial (COM) port is required. Software is required. Please contact LEEC limited for further
details
10.4.
Ethernet communication (ETH)
This is an option that must be specified at the point of ordering.
An Ethernet port can be fitted to connect the incubator to a network. This allows the SD card to be remotely
accessed and for the incubator screen to be displayed on a PC.
Connection to a PC network is required. Contact your IT manager to see if this possible.
Instructions will be sent separately when this option is ordered.
10.5.
Multi-door (8ID)
This can be retro fitted.
The inner glass door can be replaced with a multi-door. This has 8 smaller glass doors in a stainless steel
frame.
By only opening one small door to access the sample you require, less heat, humidity and CO2 are lost.
This improves recovery of the chamber back to ideal conditions and reduces the amount of CO
2
used.
11. Accessories
This is the list of some of the accessories currently available.
Please contact LEEC if the part you require is not listed.
PTSK
Stacking kit for 2 x Touch 190
PTST1
Wheeled platform for Touch 190
PRV
Single stage CO2 pressure reducing valve
PRV2
Two stage CO2 pressure reducing valve
RO6
In line CO2 reducing valve with gauge (0.1 to 2bar)
PNEU
Automatic change over unit for two CO2 cylinders
TYGON
Tygon gas tubing, per meter