Jan 2012
T190 Iss.2
Page 15 of 38
5.4.
Main display
The main screen shows chamber set points (SP) and process values (PV). It also shows the status of any
alarm and has touch screen buttons for accessing further functions.
Temperature process value
Chamber temperature set point
CO
2
process value
Chamber CO
2
set point
Sterilise cycle start
Menu escape
5.5.
Changing temperature set points and high / low alarms.
To change the temperature set point, touch this area of the main screen:
Touch here to alter set point
Touch here to alter high alarm limit
Touch here to alter low alarm limit
Use the key pad to change the set point.
Maximum set point is limited to 60.0 °C
Minimum set point is limited to 25 °C
Press to confirm selection.