The safety messages that follow have WARNING
level hazards.
Crush Hazard
Keep bystanders away from work area before and
during operation.
Modification Hazard
Never modify the LeeBoy machine without the written
consent of LeeBoy. Any modification can affect the safe
operation of the paver and may cause personal injury or
death.
Exposure Hazard
Operators of the paver must be aware of
their work environment and the equipment
needed to work safely.
•
Always wear personal protective equipment, including
appropriate clothing, gloves, work shoes, and
protection for eyes and ears, as required by the task
at hand.
Explosion Hazard
While the engine is running or the battery is
charging, hydrogen gas is being produced
and can be easily ignited. Keep the area
around the battery well-ventilated and keep
sparks, open flame, and any other form of
ignition out of the area.
•
Always disconnect the negative (-) battery cable
before servicing the paver.
•
Do not start the engine by shorting the starter circuit
or any other starting method not stated in this manual.
Only use the starting procedure as described in this
manual to start the engine.
•
Never charge a frozen battery. Always slowly warm the
battery to room temperature before charging.
Fire and Explosion Hazard
•
Diesel fuel is flammable and explosive under certain
conditions.
•
Never use a shop rag to catch fuel.
•
Wipe up all spills immediately.
•
Never refuel with the engine running.
•
Store any containers containing fuel in a well-
ventilated area, away from any combustibles or
sources of ignition.
Fire Hazard
When operating machinery there is a risk for
fire. Always have appropriate safety
equipment available.
•
Keep a charged fire extinguisher within reach when
working in an environment where a fire may occur.
•
Have all fire extinguishers checked periodically for
proper operation and/or readiness.
•
Always read and follow safety-related precautions
found on containers of hazardous substances
like parts cleaners, primers, sealants and sealant
removers.
•
Undersized wiring systems can cause electrical fires.
Entanglement/Sever Hazard
Verify there are no people, obstacles or
other equipment near the machine before
starting the engine. Sound the horn as a
warning before starting the engine.
If the engine must be serviced while it is
operating, remove all jewelry and tie back
long hair before operating or servicing the
machine.
•
Keep hands, other body parts, and clothing away from
moving/rotating parts.
1
Safety
LeeBoy 8510E Conveyor Paver
1-5
Summary of Contents for 8510E
