LEDWORKS Twinkly Pro, Instruction Manual

Page: 10 / 34

EN
1. Power up the Power Line Controller connected to the PoE
IN port, then press and hold the button on the case until the
status LED makes a short red pulse.
– Once the PoE is turned on for the first time, it will remain
active even if you disconnect the controller.
– To turn off the PoE press and hold the button on the
controller until the flashing red LED stops.
2. Wait for connection to be established, refer to the network
connection LED on the Power Line Controller to make a burst
blink.
– In case you are using Twinkly PRO Connection Hub, ensure
you have successfully configured it prior to this step, refer to
its quickguide for more info.
STATUS LED | LED DI STATO | VOYANT D’ÉTAT | STATUS-
LED | LED DE ESTADO | STATUS-LED | DIODA LED STANU |
СВІТЛОДІОД СТАТУСУ | ИНДИКАТОР СОСТОЯНИЯ
NETWORK CONNECTION LED | LED CONNESSIONE DI RETE | VOYANT DE
CONNEXION RÉSEAU | NETZWERKVERBINDUNG-LED | LED DE CONEXIÓN DE RED |
NETWERKVERBINDINGS-LED | DIODA LED POŁĄCZENIA SIECIOWEGO | СВІТЛОДІОД
ПІДКЛЮЧЕННЯ ДО МЕРЕЖІ | ИНДИКАТОР СЕТЕВОГО ПОДКЛЮЧЕНИЯ
enabling the PoE
ATTIVARE IL POE | ACTIVATION DU SYSTÈME POE |AKTIVIEREN DES POE | HABILITACIÓN DE POE | INSCHAKELEN
VAN DE POE | WŁĄCZENIE POE | УВІМКНЕННЯ ЖИВЛЕННЯ ЧЕРЕЗ ETHERNET | ВКЛЮЧЕНИЕ POE