LeddarOne
–
User Guide
Page 25 of 52
Leddar
TM
Configurator
Leddar™ Configurator provides configuration parameters and operation functionalities for the
Leddar™One Sensing Module
.
4.1. Installing Leddar
TM
Configurator
See section 2.1
for guidelines regarding installation of Leddar™ Configurator. Once the
installation is completed, you can connect to the sensor.
4.2. Connecting to the Module
To configure the sensor, you must first connect to it.
To connect to the sensor:
1.
In Leddar™ Configurator, click the connect button
.
Figure 12: Connecting to a Device
2. In the
Connection
dialog box, select the serial port that you want to establish a connection
with and click
Connect
.
The device has default serial port parameters. Once connected, you can modify the baud
rate or/and ModBus Address (see section 4.4.1).
Summary of Contents for LeddarOne
