background image

2.0  UNPACKING AND INVENTORY

The laminator arrives fully assembled. Upon arrival, inspect the unit immediately and 

thoroughly using the packing list that accompanies the shipment. Please follow these 

steps to correct any problem with your shipment. Ledco, Inc. cannot accept any re-

sponsibility for damage or loss unless you notify us within ten days of receipt of ship-

ment and follow these procedures:

BREAKAGE OR DAMAGE: It is imperative that any shipping damage is reported and a 

claim is filed with the delivering carrier immediately upon receipt of damaged shipment. 

The procedure for reporting damage depends on the method of shipment. Please note 

damage on bill of lading.

FREIGHT, EXPRESS, or TRUCK DELIVERY: According to the contract terms and 

conditions of the carrier, the responsibility of the shipper ends at the time and place of 

shipment. The carrier then assumes full responsibility for the shipment.

1. 

Notify Ledco IMMEDIATELY.

2. 

Hold damaged goods with container and packing for inspection by the examining 

agent. Ledco will arrange the inspection.

3. 

DO NOT RETURN ANY GOODS TO LEDCO PRIOR TO AUTHORIZATION BY 

LEDCO.

4. 

Submit a copy of the inspector’s report to Ledco. Ledco will file the claim with 

the carrier. Ledco will replace your machinery if necessary. You will be credited for the 

damaged machinery when the claim is processed.

SHORTAGE:

1. 

Check the packing list notations. The apparent shortage may have been marked 

as an international short-shipped (back-ordered) item.

2. 

Examine the container and packing material, particularly for smaller items.

3. 

Make certain that unauthorized personnel prior to complete unpacking did not 

remove the item and inventory.

4. 

Call us and send immediate written notification of the shortage.

INCORRECT SHIPMENT:

1. 

If the material you receive does not correspond with your order, notify Ledco im-

mediately. Include the order number and item(s).

2. 

Hold item(s) until return instructions are received.

RETURNS: DO NOT RETURN DAMAGED OR INCORRECT ITEMS UNTIL YOU 

HAVE RECEIVED SHIPPING INSTRUCTIONS AND AN AUTHORIZATION NUMBER 

FROM LEDCO.

Summary of Contents for 44" Pouch


















Reviews: