www.ledneonflex.com
www.GLLS.com
B1
INPUT:AC100~240VAC,50-60Hz
OUTPUT:DC24V
B2
INPUT:AC100~240VAC,50-60Hz
OUTPUT:DC24V
Color T emperature Controller
Driver
GND
①
Driver
GND
②
Color T emperature Controller
Instructions for Dynamic White Wiring:
Red Wire Connects to Anode(+).
Yellow Wire Connects to Low Color Temperature Connection, Cathode(-).
Black Wire Connects to High Color Temperature Connection, Cathode(-).
The Dynamic White light can be powered on
by connecting one end to the controller. It can
be different lengths or combined with other
connectors, but each length must not exceed
10m and the combined lengths cannot over-
load the controller.
The Dynamic White light can be powered on
by connecting both ends to the controller
within allowed maximum 20m.
Max Continuous length
Product Number
Single Feed
Double Feed
NF-11D-T-01-3W-E-XXX-24DC
32.81ft (10m)
65.62ft (20m)
General Wiring Diagrams
Dynamic White Wiring
• This LED Neon Flex Fixture is only compatible with a 24V power supply.
• Always observe proper polarity.
• Always add an additional 20% to the maximum load when sizing the power supply.
• Ensure that the power cable drawing current is no more than 80% of its current capacity.
• To minimize the voltage drop and maintain light consistency, do not use excessive lengths of wire
between the power supply and light fixture.
• Accepts PWM input. Compatible with DMX decoders.
21
