www.ledneonflex.com
www.GLLS.com
12
Snap Connector & End Cap Assembly
Fig. 4
Fig. 4
Fig. 5
Fig. 5
Snap Connector
Snap End Cap
03.6 |
Compression clip and Snap Cover
Installation
Align the lead conector and grip plate with
the compression clip (Fig. 4).
Apply even pressure to the lead connector
and light fixture, pressing them into the
compression clips until they are sitting
flush along the bottom of the clip with no
gaps. This will pull the fixture tight to the
lead connector (Fig. 5).
