LED PARKING LOT LIGHT
Installation Instruction
Please read this manual carefully before using the product
1. Be careful to open the carton, contact us if any damage.
2. This product must be installed in accordance with the applicable installation, code by a person familiar with the construction and
operation of the product and the hazards involved.
3. “caution - risk of shock” and “disconnect power before servicing” when photoelectric switch provided.
4. Please check whether the voltage marked on the luminaire is consistent with the input voltage to be connected, so as not to
damage the LED luminaire.
5. To ensure the lifetime of the product, please do not use it in a place with strong acid mist.
6. Make sure the installation position can withstand 10 times the weight of the luminaire before installation and install it at a flat place
without vibration, no swing, no fire hazard.
Notes before Installation
-1-
Parameter
1. Product model
：
see the product label for the product model
2. Product power
：
80W
、
100W
、
150W
、
250W
、
320W, See the product label for product power.
3. input voltage
：
120-347VAC or 200-480VAC, See the product label for product input voltage.
4. Product size
（
Does not contain lamp arm
）：
8
0W/
10
0W/
15
0W -
353
*
270
*
60
mm
、
250W/320W -520*320*62.5mm
；
5. product weight
（
Does not contain lamp arm
）：
8
0W/
10
0W/
15
0W -
3
.
85
kg
、
250
W
/
320
W
-
7.3kg
；
6. Ambient temperature
：
-25
℃
-+45
℃
7. Protection level
：
IP65 Or wet conditions
8. Product life warranty is 5 years
9. Humidity
：
≤95%.
10. Air Pressure
：
90-106 Kpa
Application
Widely used in outdoor parking, road lighting
.
Package
1
.
LED Parking lot light.
2. Installation Instruction.
3. Built-in fittings
,
XSY-ALRRMMMW-XXK-YYY-ZR
RR=The input voltage HV=200-480V, without HV=120-347V.
Z can be "
D
" and "
N
", "
D
"=with sensor , "N"=without sensor .
XXK=CCT 40K=4000K, 50K=5000K, 57K=5700K
.
R can be"S"or"E"or"M"or"F",S=Slip Fitter Arm,E=Extruded Arm,M=Surface mounting Arm,F=Slip Extruded Arm
；
MMMW
=
Actual declared power.
YYY
=
Optical Angle
III=Type III V=Type V
.
Slip Fi er
Slip Fi er
+
Surface moun ng
Photocell/Non-Photocell Removable, Twist Lock for them
Shorting cap
Photocell
Description induction module
M6Screw
(2PCS)
M8Screw
(4PCS)
M6Screw
(2PCS)
M10Screw
(2PCS)
M6Screw
(2PCS)
M10Screw
(2PCS)
M6Screw
(2PCS)
M8Screw
(2PCS) (2PCS) (2PCS)
Flat mat
Spring
mat
Follow up customer
request is optional
Extruded Arm
Extruded Arm
