CHSIFBR1B
LECTROSONICS, INC.
6
Operating Instructions
1) If connecting more than one module together,
remove plastic covers from connectors, and con-
nect the CHISFBR1B modules together. (You may
have up to 4 connected on one power supply.)
Line up the connectors as shown.
Connect the modules together and slide the con-
nectors in the following motion until the chargers
are level.
2) Connect the power supply.
3) Observe the connector markers on the battery.
Place up to four batteries per charger in the
charging slot.
OR up to four IFBR1Bs (or a combination of
each). You will know that your connection is cor-
rect on either a battery or IFBR1B when the LED
illuminates.
When a battery or IFBR1B is being charged the
LED next to it will glow RED. When the battery is
fully charged, the LED will glow GREEN.
If a fault occurs, the power to the slot will be
disabled and the LED will turn off.
STATE
LED COLOR
Charging
RED
Fully charged
GREEN
Timer fault*
OFF
No battery/IFBR1B
present
OFF
*A timer keeps track of the charging activity and turns the
LED off if the battery cannot be charged after a period of
several hours.
4) To disconnect the modules, remove all batteries/
IFBR1Bs, diconnect power and then slide the
modules in the opposite direction.
