CHSIFBR1B
LECTROSONICS, INC.
4
Do not allow water or other liquids to enter
the battery trays or other openings in this
charger, as this could cause fire or electri-
cal shock. Take extra precautions if you are
using the unit in a rainy or snowy location, or other wet
area.
Do not modify or disassemble this charger,
as there is a risk of fire or electrical shock.
Do not use this charger with a power source
other than the specified 100-240VAC (3A
minimum capacity). Using a supply outside
of the specified range may cause fire or
electrical shock.
Do not store the rechargeable battery in a
case, drawer, cabinet, etc. where small
metal objects such as coins, paper clips or
tools could contact the poles on the
battery. This could cause the battery to split or leak,
resulting in fire or personal injury.
Do not expose the rechargeable battery to
heat or attempt to disassemble it. Do not
place the battery in water or fire. Any of
these can cause fire or personal injury.
CAUTION
Keep this charger out of the reach of chil-
dren.
Do not leave this charger in a damp or dusty
environment. Doing so could case fire or
electrical shock.
Specifications
Dimensions:
4.82 in. wide (122.30 mm)
(including connectors)
1.20 in. high (30.43 mm)
9.00 in. long (228.60 mm)
Weight:
1.04 lbs. (471.74 grams)
Battery charging time: 3 hours
Power requirements: 100-240 VAC, 50-60Hz, 2A max
Optional Accessories
The Lectrosonics DCR5/9AU power supply is required
for use with the charger, and can power up to 4 mod-
ules. It is not shipped with the charger.
The Lectrosonics LB-50
is the only battery that
should be used with the CHSIFBR1B charger or in
the IFBR1B Receiver.
