background image

164201241-001 Rev. C0

3

Contacting Alpha Technologies:

For general 

product information and customer service

1-800-863-3930

(7:00 AM to 5:00 PM Pacific Time )

For complete 

technical support

1-800-863-3364

 

(7:00 AM to 5:00 PM Pacific Time, or 24/7 emergency support)

MiniMax Power Supply

Installation and Operation Manual

 60V/9A and 60V/15A Output Models

164201241-001 Rev. C0    © 2003 Alpha Technologies

Photographs and drawings contained in this manual are for illustrative purposes only.
These photographs and drawings may not exactly match your installation.

Review the drawings and illustrations contained in this manual before proceeding.
If there are questions regarding the safe operation of this powering system, please
contact Alpha Technologies or your nearest Alpha representative.

Alpha denies responsibility for any damage or injury involving its enclosures, power
supplies, generators, batteries, or other hardware when used for an unintended
purpose, installed or operated in an unapproved manner, or improperly maintained.

WARRANTY NOTICE

Alpha Technologies, Inc., provides a LIMITED WARRANTY covering the
performance of all Alpha’s CATV and Broadband products. The terms and
conditions of the LIMITED WARRANTY STATEMENT are contained in a separate
written LIMITED WARRANTY STATEMENT. If there are any warranty claims, the
purchaser (or purchaser’s representative) must follow the LIMITED WARRANTY
guidelines, described in the applicable LIMITED WARRANTY STATEMENT.

NOTE

NOTE

NOTE

Summary of Contents for MiniMax



















Reviews: