Leckey Squiggles, User Instructions

Page: 6 / 194

The Leckey Squiggles Seating System has
been crash tested and passed for use in
vehicles. It has been tested in its complete
configuration on a surrogate base with a
Leckey contoured head support attached.
If the Leckey Squiggles Seating System
is being used in a vehicle the following
points must be adhered to:
The Squiggles Seating System must
be positioned forward facing and used
with an Unwin Restraint System and a
contoured head support which should
be suitably positioned at all times
during transportation. The contoured
head support is available as an optional
accessory with the Squiggles
Seating System.
The Squiggles Seating System is crash
tested and meets the requirements of
ISO16840 part 4. The seat has also been
tested and meets the requirements of
ISO 7176-8.
Important
These crash test details refer to the
Leckey Squiggles Seating System and
interface plate only. If you are using the
Squiggles Seating System on a wheelchair
base, please refer to the wheelchair
manufacturer’s handbook for crash
test details.
Squiggles Seating System
- Crash Test
14. Do not place hot objects on the tray
greater than 40ºC.
15. Clean the product regularly.
Do not use abrasive cleaners. Carry
out maintenance checks on a regular
basis to ensure your product is in good
working condition.
16 The product is designed for indoor
use and when not in use should be
stored in a dry place that is not subjected
to extremes of temperature. The safe
operating temperature range of the
product is +5 to +40 deg Celsius.
17 Always check the plastic hand knobs
on the push handle are tightened securely
before you move the seat unit.
18 Before using the seating system always
check that the interface handle on the
seat unit is fully engaged with the chassis.
Make sure the locking pin in engaged
so the handle cannot be accidentally
released. If the handle is not engaged
properly the seat unit may come loose
and could cause serious injury to the
child or carer.
JAMES LECKEY DESIGN
ISO 16840/4 HYGE SLED TEST
SQUIGGLES SEAT BASE
RESTRAINTS : UNWIN
OCCUPANT : 6YO
TEST DATE 3RD OCT 2006
MILLBROOK TEST No. S9638
MILLBROOK REPORT
No. MBK 06/0918
PASSED