Leckey Squiggles, User Instructions

Page: 40 / 194

Height adjustment -
Easy chassis
The height of the easy chassis should be
set before putting the child in the seat. To
adjust the height loosen the ratchet handle
(A) at the rear of the main stem and adjust
the seat to the required height. To lower
the seat height, apply weight centrally
on the seat base above the center stem.
Re-tighten the ratchet handle to secure.
Check the ratchet handle regularly
to ensure the seat height adjustment
is secure.
Do not height adjust with the child
in the seat.
Tilt in space
The tilt in space can be angled while the user
is in the seat. Before you adjust the tilt-in-
space angle of the seat always ensure the
pelvic harness is secured preventing the user
from sliding forward in the seat.
The collar (B) should always be in the locked
position when the seat is in use. To actuate
the lever(C) first unlock the collar (B) by
rotating it until it clicks into the open position.
Press the lever down and set to
the desired angle holding the handle bar
throughout. Re-lock the locking collar
after you have set the tilt position.
Always keep the collar (B) in the locked
position to prevent accidental actuation of
the lever which could cause the seat unit to
jolt and possibly cause injury to the child.
Please use handle bars when operating
tilt in space.
Always check with your therapist that the
use of “tilt in Space” will not cause any
obstructions to the child’s airways.
A
C
B