3
1
Remove gasket 5TC.000.55.21.G0.1 (pos. 18).
Inspection
Inspect for foreign objects that may have entered the interior of the high impact tank cleaning
machine. Foreign objects may adversely affect the life of the gearbox and turbine.
Worm gear
During maintenance 1, the worm gear should be visually inspected for wear. See note
Inspection of worm gear on page 67.
Shank pos. 9
During maintenance 1, the shaft pos. 9 should be visually inspected for wear. See note on
shaft inspection pos. 9 page 71.
Assembly
Information Assembly
The assembly of the 5TM is carried out in the reversed order of the disassembly. After disas-
sembly of the high impact tank cleaning machine, all parts must be cleaned carefully. In the
course of maintenance, we always recommend to replace all parts included in the main-
tenance package. In the following assembly instructions the parts are described with an item
number. This item number you can find as well in the spare parts list and in the exploded view.
In addition to the steps describes below, please consider the following points during the
assembly:
All socket head screw and hexagon head screws must be secured with a threadlocker
(e.g. Loctite
®
243
TM
).
Tighten screws evenly and if necessary, crosswise.
All socket head screws and hexagon head screws must be tightened to a torque of
approx. 3 – 4 Nm (2.2 – 3 ft · lb).
Observe correct position of the parts.
