Lec Contour, User Manual

Page: 8 / 20

SECTION 3: OPERATING INSTRUCTIONS
Control Panel Operation
Slides seat fully
forward & opens
armrest doors
Your Contour control panel is connected and ready for use. See below for descriptions of
each button functionality. For the top row of buttons, push and hold the button until the
chair movement stops - this means you have reached the memory position. For the lower
set of buttons, push and hold until the desired position is reached.
Always use extreme caution when making any position adjustments to your
chair. Ensure all body parts and objects are clear from all moving parts.
6
Closes armrest
doors
Seat memory
position 1*
(appx 2” back from
“open” position)
Seat memory
position 2*
(appx 4” back from
“open” position)
Raise
Footrest
Lower
Footrest
Slide Seat
Backward*
Slide Seat
Forward
Electric Back Tilt
The electric back tilt buttons are conveniently located on the inside of the left armrest door,
where clients can easily make tilt adjustments themselves. See below for descriptions of button
functionality.
*NOTE
If the “Slide Seat Backward”, “Seat memory position 1”, or “Seat memory position 2” buttons
aren’t working, ensure the armrest doors ARE FULLY CLOSED. These buttons will not activate if the
armrest doors are at all open. Positions are preset at factory and cannot be changed.
Decrease Seat
Back Tilt
Increase Seat Back Tilt
Increase Seat
Back Tilt