READ AND SAVE THESE INSTRUCTIONS
3
SECTION 1: SAFETY INFORMATION
•
DO NOT reach for any electrical object that has fallen into the water. Unplug immediately.
•
DO NOT drop or insert anything into jet opening.
•
DO NOT operate without the complete jet assembly installed or without water filled 1 inch above jets.
•
DO NOT overfill the basin.
•
DO NOT stand on or in the basin, or on the foot rest.
•
DO NOT leave this appliance unattended when in operation.
•
DO NOT use outdoors.
•
Keep the electrical cord away from heated surfaces.
•
Connect this appliance only to a properly grounded outlet.
•
To avoid injury, exercise care when entering or exiting the chair and foot bath.
•
Use caution when making positioning adjustments to your chair. Keep all equipment and body parts
away from moving parts while making any adjustments.
•
It is important that you clean and disinfect the jets and basin after every use.
•
Hydrotherapy should be pleasant and comfortable. Should you or a client experience any pain or
discomfort while using the foot bath, discontinue use immediately and consult a physician.
•
You or your clients should consult a physician if diabetic, have poor circulation, if feet or legs are in-
flamed, have an open wound, or if you have questions about whether you should be using hydro mas-
sage equipment.
•
A qualified plumber and electrician are strongly recommended to install your foot bath.
•
Make certain that the cord and plug are maintained in good condition and are not allowed to become
damaged while in use. Avoid positioning the cord in the traffic lane and it is always kept out of the way.
Take this furnishing out of service immediately if the cord or plug becomes damaged in any way.
•
Do not attempt to repair. All repairs must be performed by an authorized service representative.
1. RISK OF ELECTRIC SHOCK. Connect only to a circuit protected by a ground-fault
circuit-interrupter.
2. Grounding is required. The unit should be installed by a qualified service
representative and grounded.
This product must be grounded. If it should malfunction or break down, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This product is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into
an appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
Improper connection of the equipment-grounding connector can result in a risk of electric shock. Check
with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by
a qualified electrician.
INSTALLATION INSTRUCTIONS / GROUNDING INSTRUCTIONS
Reset
Button
GFCI Outlet
Grounding Pin
Test
Button
See Installation Manual for full
installation instructions
Summary of Contents for Contour
Page 19: ......
