Does the Contour have backflow prevention?
Yes - see pages 10-11 in Installation Manual for backflow prevention details.
Do I still have to install backflow prevention on my main water supply line?
This is entirely dependent on your local and/or state codes. A licensed plumber with knowledge of
your local and/or state codes can answer this question for you.
Do we need to install a p-trap?
Check with the licensed plumber performing the install. It is dependent on your drain location.
Can you provide a letter to my city inspector stating my electrical and/or plumbing setup is
acceptable?
Unfortunately not. In this document, we have provided all the information that a licensed plumber
and electrician would need to perform the proper install that adheres to local and state codes. Living
Earth Crafts does not have knowledge of all local and state codes and therefore is not qualified to
advise on individual setup questions. If an inspector has questions about how your plumbing and/
or electrical is being set up, you will need to contact your plumber and/or electrician.
Does the Contour have GFI/GFCI built in?
There are no GFI/GFCIs built in to the system - we require a GFCI protected grounded circuit to
supply power to the Contour.
Frequently Asked Questions
16
Summary of Contents for Contour
Page 19: ......
