6. RECOMMENDATIONS
You are recommended to wait until the chamber reaches its operational temperature before
•
introducing any product.
In order to obtain better performance, avoid the introduction of hot foods as well as drinks that
•
are not in sealed packages.
Protect foods and their odours by using some hermetic closing system, placing them in the unit
•
in such a way that allows for a good circulation of air, respecting the maximum load indicated on
the inside of the unit.
Avoid as far as possible the frequent opening of doors and above all, do not leave the doors
•
open.
Avoid placing sheets of cardboard or paper on the shelves as these will obstruct the circulation of
•
air.
When the unit has to be turned off for a long period of time, the following steps are recommended:
Remove the products from the inside of the unit.
•
Disconnect the main switch and unplug the unit.
•
Clean the inside and outside of the unit.
•
Partially open the door so that air can circulate and in this way avoid foul odours.
•
7. PRECAUTIONS
The stability of the unit is guaranteed, even when the doors are open, however leaning on the
•
doors is completely prohibited.
In those units equipped with metallic drawers, it is not advisable to load them with more than
•
30kg weight per drawer or 25kg in plastic boxes, ensuring in all cases that the load is uniformly
distributed. For this reason sitting or leaning on the drawers is not allowed.
Do not remove the protection from the movable components without having previously discon-
•
nected the power supply.
Take necessary precautions before manipulating the condenser unit area, due to the existence
•
of high temperatures of some of the components and the resultant risk of burns.
Children must be supervised to ensure that they do not play with the refrigerated unit.
8. MAINTENANCE
Before carrying out any cleaning operation, disconnect the unit from the power supply and place the
main switch in the
OFF
or
0
position.
The units are equipped with a drainage outlet to make cleaning easier, as well as allowing for the
eventual seepage of liquids from the foods. During cleaning, the drainage outlet cover has to be re-
moved and cleaned in order to avoid being blocked by solid elements being pulled into it.
The good operation and performance of the unit will largely depend on its correct maintenance,
carried out periodically.
www.lec-commercial.co.uk
9
