background image

Time expiration 00:00:00

If enabled, a tone on the Tag and Base Unit will beep slowly three times.

If a Tag is replaced in the Base Unit before its COUNTDOWN time expires, no
alarm notifications (light flash or audio tone) will be given on the Base Unit or Tag.

Audio alarms are enabled for the Base Unit and Tags separately (see Powering
On and Base Volume).

4. Important Reminders

A Tag must be docked according to color in the Base Unit for programming!
Tags not properly docked in the Base Unit according to correct color will emit a
tone alarm indicating misplacement.

Each of the three Time Tracker

®

Tags can be programmed and removed

independently without disruption to in-progress timing for another Tag.

A Tag will remember its current programming until assigned another mode or time
amount, or until its battery is removed to clear the Tag’s memory. 

In order to conserve power, Tags will shut off their display screens as follows:

1. If a Tag is away from the Base Unit and its time has expired, the Tag’s

screen will shut off after 20 minutes of inactivity.

2. A docked Tag will shut off its display screen after 5 minutes of inactivity.

To restore a Tag’s display screen, simply dock, reprogram, or remove the Tag from
the Base Unit to reactivate the Tag.

5. Digital Clock (12- or 24-Hour)

The Base Display can serve as a 12- or 24-hour digital clock.

Press and hold the HR and SEC buttons for five seconds to show the 12-hour
digital clock on the Base Display. (For the 24-hour clock display, press and hold
the MIN and SEC buttons for five seconds)

Use the HR, MIN, and SEC buttons to set or reprogram the clock time on the
Base Display.

Tag monitoring will continue for any Tags away from the Base Unit while the Base
Display is in clock mode.

To switch back to Tag monitoring on the Base Display from the clock display,
press any of the colored Mode buttons. If a Tag is removed or replaced, or if
Tag’s time expires while the Base Unit is in clock display, the Base Display will
automatically switch back to the Tag monitoring screen.  

5

s

s

s

Recommended Use and Care 

• Monitor students or visitors using Time Tracker

®

Tags as electronic passes

• Track learning centers or lab time for individuals 

or groups

• Monitor conference-room meetings
• Track play, homework, or chore time around 

the house

…The possibilities are endless!

• Do not allow children under 4 years of age to wear

the Tags.

• The Base Unit should only be programmed by 

an adult.

• Do not submerge the Base Unit or Tags in water.
• Prevent spilling food or beverages on the Base

Unit and Tags.

• To clean, wipe gently with a barely damp, 

soft cloth.

• Do not throw or drop the Base Unit or Tags.
• Do not swing the Tags by the wristbands.
• Do not press on the displays of the Base Unit 

or Tags.

Summary of Contents for Time Tracker LER6999









Reviews: