How to Use
Programming Time Tracker
®
Tags is easy.
Make sure each of the three Time Tracker
®
Tags has one AA battery installed (see
Installing or Replacing Batteries) and that the Base Unit is plugging in correctly (see
AC Adapter).
1. Powering On and Base Volume
Make sure each of the three Time Tracker
®
Tags is docked in the Base Unit
according to color. Tags not properly docked in the Base Unit according to correct
color will emit a tone alarm indicating misplacement.
Slide the power button up to the desired position
= The audio alarm for the Base Unit is OFF and
disable
Low = The audio alarm for the Base Unit
is ON with low volume
High = The audio alarm for the Base Unit is ON with high volume
HIGH
LOW
OFF
2
Installing or Replacing Batteries
Requires:
Phillips screwdriver
1 AA battery for each Tag Timer (3 total)
Optional—3 AA batteries for the Base Unit
Batteries should be installed or replaced by an
adult. Each Tag Timer (3) requires 1 AA battery
(not included).
The battery compartment is located on the back of
each Tag Timer and is secured with a Phillips-style
screw that holds both the belt clip and battery door
in place.
Tags
To install or replace a battery in a Tag, first remove
the Tag from the Base Unit.
1. Undo the screw (using a Phillips screwdriver)
and remove the belt clip and battery door.
2. Install 1 AA battery as indicated inside the
compartment.
3. Replace the battery-compartment door and
belt clip and secure with the screw.
See Important Battery Care and Maintenance Tips
at the end of this guide for additional battery care.
Base Unit – Optional
As an alternative to the included AC adapter, the
Base Unit can be powered by 3 AA batteries.
To install or replace batteries in the Base Unit:
1. Make sure the power is off and the Base Unit is
unplugged completely from AC adapter power.
2. Undo the battery-compartment door screws
(using a Phillips screwdriver) located on the
bottom of the Base Unit.
3. Install 3 AA batteries as indicated inside the
compartment.
4. Replace the battery-compartment door and
secure the screws.
Although AC adapter power will override battery
power, batteries should be removed from the Base
Unit whenever the Base Unit is running off of AC
adapter power.
See Important Battery Care and Maintenance Tips
at the end of this guide for additional battery care.
AC Adapter
An AC adapter has been included for use with the
Base Unit.
NOTE: Each Tag is powered separately by 1 AA
battery. The AC adapter only powers the Base Unit.
CAUTION: The AC adapter is only designed for use
with this Learning Resources
®
Time Tracker
®
Tags product.
To use the AC adapter to power the Base Unit:
1. Make sure the Base Unit power switch is in the
off position.
2. Carefully insert the appropriate AC adapter
end into the Base Unit’s adapter port.
3. Insert the plug into a wall outlet and use the
power button to turn the Base Unit on and
activate the Tags.
AC adapter specifications:
Class 2 Power Supply
Input: 120VAC 60Hz 7W
Output: 3.6VDC 300mA
Remove batteries from the Base Unit whenever
using AC adapter power.
s
