background image

2. Selecting and Using a Tag

A Tag must be docked according to color in the Base Unit for programming! 

Each of the three Time Tracker

®

Tags can be programmed and removed

independently without disruption to in-progress timing for another Tag. 

Press a Tag Mode button to toggle through 1 of 3 modes for a specific 
Tag timer:

The Base Display will flash to indicate the Tag line being programmed.

The color light corresponding to the Tag on the Base Display will also light up to
indicate the Tag is being programmed. 

Mode 1: Countdown with Audio Alarm

In 

COUNTDOWN

mode, enter a target time in the display screen from which the

Tag will count down to zero (00:00:00). The alarm bell icon      will flash indicating
the countdown mode is being programmed for a Tag.

Use the HR, MIN, or SEC buttons to enter the countdown time when prompted
by the flashing 00:00:00.

Remove the Tag from the Base Unit to begin the countdown.

Replacing the Tag in the Base Unit and removing it again will restart the Tag’s
programmed countdown.

Return the Tag to the Base Unit and press Stop to reset the Tag to the
previously programmed time.

If Stop is not pressed, the Tag will continue its countdown while docked in the
Base Unit until reaching 00:00:00. The Tag will then reset to its previously
programmed time. No alarm notifications occur for Tags expiring while in the 
Base Unit.

Press the HR, MIN, or SEC buttons one time and release to increase time 
by increments of one. Press and hold the buttons to quickly scroll through 
digits 0–99 (HR) or 0-59 (MIN, SEC). Release the button to stop scrolling. 

The maximum COUNTDOWN time is 99:59:59.

Tag will remember its current mode until assigned another mode or time amount,
or until its battery is removed to clear the Tag’s memory.

Mode 2: Countdown with No Audio Alarm

This mode operates the same as Mode 1, except that the audio alarm for the Tag
timer is disabled.

s

s

s

s

00

00 00

00

00

00

DOWN

DOWN

COUNT

COUNT

00

00 00

00

00

00

COUNT

COUNT

00

00 00

00

00

00

COUNT

COUNT

00

00 00

00

00

00

COUNT

COUNT

DOWN

DOWN

UP

UP

DOWN

DOWN

Tag Mode

Buttons

3

Summary of Contents for Time Tracker LER6999









Reviews: